product description
The Swing Ball is a ball nose rougher made for heavy duty machining. The large insert can withstand heavy impact and take deep depths of cut. Several inserts are available for materials such as stainless steel or hardened weld. Two inserts get loaded into the body, one being the main and the other a periphery. There are also inserts up the side for additional side milling.
Inserts
SWB2***HME
"Main" insert with a flat top, good for most materials.
Corner Radius: 0.375" - 0.625" Available grades: JC8015 JC5040
SWB2***HMNE
"Main" insert with notched chip breaker for heavy cuts.
Corner Radius: 0.750" - 0.984" OR 20MM-25MM Available grades: JC8015 JC5040
SWB2***MMW
"Main" insert with negative edge prep for machining weld and hardened materials.
Corner Radius: 0.375" - 0.984" OR 16MM-25MM Available grades: JC8015
SWB2***HSE
"Periphery" insert with flat top, good for most materials.
Corner Radius: 0.375" - 0.0625" Available grades: JC8015 JC5040
SWB2***HSNE
"Periphery" insert with notched chip breaker for heavy cuts.
Corner Radius: 0.750" - 0.984" OR 20MM-25MM Available grades: JC8015 JC5040
SWB2***MSW
"Periphery" insert with negative edge prep for machining weld and hardened materials.
Corner Radius: 0.375" - 0.984" OR 16MM-25MM Available grades: JC8015
IM-SP32GS, IM-SP43GS, SPGA090304
Swing Ball "Side" insert.
Corner Radius: 0.4 MM 0.8 MM Available grades: JC5015 JC5118 JC5040
ZCMT100308R
Side insert for End Mill style bodies.
Corner Radius: 0.031" Available grades: JC5015 JC5040
