products / HIGH FEED

SKG 10

product description

The SKG-10 is a high feed cutter that has a low cutting force. The maximum depth of cut on this 10mm square insert is .060”. The square geometry will help achieve high metal removal rates while maintaining a minimal spindle load. This cutter is good for a wide range of steel and high nickel alloys. Flat top inserts for face milling and chip breaker inserts for pocketing are available for this tool. The bodies are made with Dijet’s special G-Body process, which is a surface hardening treatment that protects against pocket deformation.

Inserts

SPET100415ZPER-SM

10mm high feed insert that's ground to size with high tolerance. Good for high-temp alloys.

Available grades: JC7550 Programmable Corner Radius: : 2.5MM

SPMT100415ZPER-SM

Pressed to size high feed insert with chip breaker designed for high-temp alloys.

Available grades: JC7550 Programmable Corner Radius: : 2.5MM

SPMT100415ZPTR-PM

High Feed insert with chip breaker designed for mild steel and long reaches.

Available grades: JC8118 JC8050 Programmable Corner Radius: : 2.5MM

SPNW100415ZTR

High feed flat-top insert for steel up to 50 HRC.

Available grades: 3MM Programmable Corner Radius: : JC8118 JC8050

bodies

SKG-10 END MILLS

INCH Ø: 1.000" - 1.500" METRICS Ø: N/A

SKG FACE MILLS

INCH Ø: 2.000" - 3.000" METRICS Ø: 50MM - 80MM

SKG-10 MODULAR HEADS

INCH Ø: 1.000" - 1.500" METRICS Ø: 25MM - 42MM

SHANKS